Shades and blinds for fiber glass doors are getting a frequent addition. The marketing feature of the shades contain a shade that can not shift when the door has no cords, opens and is behind glass, which which will keep it clear. The advantage of the type of shade is that it’s going to fit over your current fiber glass trim molding with no modification. This makes it simple to to use and simple to install.
Measure the dimensions of your glass part of your fiber glass door. Measure all of the solution to the exterior of your trim. Purchase your shade that is enclosed to to match these measurements.
Unscrew the top-five screws on the molding. There’ll be two close to the top on every side and three over the top. Slide the best brackets for the shade supporting the molding centered on the measurements on the packaging. You can find brackets for every side. Screw the five screws back to the molding.
Hang the shade in the very best brackets. You’ll see two metal tabs that jut out of the shade frame close to the base of the body. Mark the area of all the tabs on the door using a pencil. Remove the shade.
Unscrew the screws close to your mark. Insert the l shaped bracket underneath the molding in the place that is marked. Repeat for the 2nd side. Screw the molding back. Place the shade on the most effective brackets. Lshaped the shade body flush to the do-or and try to press the steel the tab down over lshaped bracket. In case the bracket is somewhat off, faucet it having a hammer down or up till it is possible to lock it. Repeat for the 2nd side.