It’s usually disappointing when you have to dispose of your furniture or throw them away because they are damaged. However, there are a few handyman repair tips that will work for you and will go a long way in keeping your furniture in good condition. The best thing about these tips is that you won’t even have to spend a lot in the process. You do not need a lot of expensive tools and equipment to repair furniture. You just need to know those that are frequently used and how to use them well.
Below we have listed a few professional tips from the experts that you should learn about house repairs.
Use a Good Brush
A good paintbrush is always a must-have. When you visit the local hardware store, you should know what to look for. With a few hints, you can discuss your options with the attendants and get the perfect fit.
If proper finishing is your ultimate goal, always go for high-quality paintbrushes. After use, make sure you clean the paintbrushes properly so you can use them again. Cleaning also reduces the prospect of brush marks and you don’t need to keep reloading the brush all the time. For a good brush, you should be willing to go as high as $50.
Wear Plastic Gloves
You will be using different solvents from time to time, which naturally means that you need to wear quality gloves too. Some people tend to apply finishes with their bare hands, and then cleaning their hands with solvents. The solvents will eventually seep through the skin and into the bloodstream. You can avoid this by purchasing good quality gloves, which you will have to use especially when applying adhesive.
Preserving Finishes
Your finishes must stay fresh for better results. For this reason, make sure the can rims are cleaned properly so that you can preserve the quality finish. If you have to force the lids closed when you have some finish on the rims, the cans will not seal properly, and as a result, the content of the cans will dry out.
Use quality cotton cloth, especially when you are working on handyman services and wipe the rim of the can. This way, you will have a tight and clean seal, which is also very easy to open when you need to use the finishes.
Use Mini Mallet for Tight Spots
There are times when you will need to work on very tight spots and a hammer won’t do. A small mallet will be more useful, especially when joining parts of furniture together.
The good news is that small mallets are quite affordable. They are also available in different measurements, from ¾ inches to 1 ½ inches. Before purchase, carry your hammer into the hardware store. This way you can find a mini mallet that fits perfectly.
Check for Loose Bristles
It’s advisable that you pay attention to the bristles, especially those that usually break away from the brush and remain embedded in the project finish. Before you dip your brush into the can of finish, smack it a few times against your palm. The bristles that have loosened already will stick out, and you can pull them out before you start applying the finish.